HT11 serija yra dvigubos konversijos UPS su DSP valdymo technologija. Dėl aukšto įėjimo ir išėjimo galios koeficiento, savaime reguliuojamo išėjimo dažnio ir tinklo valdymo HT11 puikiai tinka kompiuteriams, telekomunikacijų įrangai ir kitiems jautriems įrenginiams.
UPS 1000VA/900W Online, Tower, 1F, 230V HT1101L
€258.00
Išankstinis užsakymas
Funkcijos:
Platus įėjimo įtampos diapazonas, o įėjimo PF>97%
Visapusiška apsauga nuo viršįtampių, trumpojo jungimo ir temperatūros viršijimo
LCD/LED ekranas, stebintis visą veikimo būseną
Automatinis ventiliatoriaus greičio reguliavimas
Įmontuotas TX atšakos išėjimo transformatorius
Produkto instrukcija: User Manual for HT11 1-3kVA True Online UPS _V3.7
| HT1101L | ||||||
| INPUT | ||||||
| Cold Start | YES, default frequency=50Hz or settable | |||||
| Acceptable Input Voltage | 110VAC~288VAC | |||||
| 100% load@>176VAC | ||||||
| 80% load@>154VAC | ||||||
| 70% load@>132VAC | ||||||
| 50% load@>110VAC | ||||||
| Phase | Single phase in,single phase out | |||||
| Transfer Voltage Range | (200VAC/208VAC/220VAC/230VAC/240VAC) | |||||
| -Line low transfer | 110VAC | |||||
| -Line low recovery | 121VAC | |||||
| -Line high transfer | 288VAC | |||||
| -Line high recovery | 281VAC | |||||
| Input Current | ||||||
| -Rating(nominal input voltage) | 4.8A | |||||
| Input Power Factor | ≥0.97 | |||||
| Input Frequency Range | 40~70Hz | |||||
| OUTPUT | ||||||
| Frequency adaptable | Settable | |||||
| Power | ||||||
| -Power(kVA) max | 1 | |||||
| -Power(kW) max | 0.9(0.8 for 200VAC/208VAC) | |||||
| Output Voltage | ||||||
| -Waveform(Bat. Mode) | Pure Sine Wave | |||||
| -Nominal voltage | 200/208/220/230/240VAC | |||||
| -Voltage regulation | ± 1 % | |||||
| -Transient response | ≤5% (0% – 100% -0%) | |||||
| -Transient recovery | ≤30ms (0% – 100% -0%) | |||||
| -Voltage distortion | ≤2% THD, linear load | |||||
| ≤ 5.5% THD, non-linear load | ||||||
| Output Frequency | ||||||
| -Synchronization range | ±5Hz default | |||||
| -Battery mode | (50±0.1) Hz default | |||||
| Transfer Time | ||||||
| -Line mode to battery mode | 0 | |||||
| -Inverter to bypass | 2ms | |||||
| Efficiency | ||||||
| -Line mode with battery full charged | 89%@100% load, 87%@50% load | |||||
| -ECO mode | 94,0% | |||||
| -Battery mode | 83%@100% load, 84%@50% load | |||||
| Noise(1m away) | <43dB@<60%load,<47dB@>60%load | |||||
|
Overload Capability(Inverter)
|
105%~130%: Transfer to bypass after 1 mins. | |||||
| 150%: Transfer to bypass after 30s | ||||||
|
Overload Capability(Battery Mode)
|
105%~130%:shutdown after 10s | |||||
| 150%:shutdown after 5s | ||||||
|
Overload Capability (Bypass Mode)
|
<130%: Long time | |||||
| >130%&<150%:Shutdown after 10min | ||||||
| >150%&<180%:Shutdown after 5 seconds | ||||||
| Crest Ratio | 3:1 | |||||
| BATTERY | ||||||
| Rating/Type |
Depend on the capacity of external batteries
|
|||||
| Quantity | ||||||
| DC Voltage | 36VDC | |||||
| Back-up Time | Depend on the capacity of external batteries | |||||
| Battery-Low Voltage | 33VAC~35VDC depending on load | |||||
| Charger | ||||||
| -Charging voltage | float:40.5VDC/boost:41.4VDC | |||||
| -Charging current (max) | 8A | |||||
| -Charging time | Depend on the capacity of external batteries | |||||
| Leakage current | <1mA | |||||
| INDICATOR & ALARM | ||||||
| -Display | LED+LCD | |||||
| -Alarm | two short one long | |||||
| -Fault | Continuous beeping | |||||
| INTERFACE | ||||||
| -Smart RS232 | Standard Cable support INVT Power Monitor Software | |||||
| -SNMP(option) | Power Managment from SNMP Manager and Web Browser | |||||
| OPTION | ||||||
| -Intelligent Kits | DB9 port, dry contact | |||||
| -USB | B-type USB port | |||||
| -SNMP Kits | pluggable type | |||||
| MECHANICAL | ||||||
| -W╳D╳H (mm) | 144*353*228/144*364*228（max） | |||||
| -W╳D╳H (mm)(shipment) | 240*448*320 | |||||
| -Net Weight (KG) | 6 | |||||
| -Package Weight(KG) | 7 | |||||
| Color | Black default | |||||
