UPS 30000VA/30000W Online, Tower, 3F, 380/400V DS330HB PF=1

4,656.00

DS Power H Online UPS naudoja naujausią DSP technologiją, kuri yra suprogramuota taip, kad tiktų įvairioms elektros aplinkoms, nepakenkiant jos veikimui. Naudojant 3 lygių topologiją, efektyvumas, patikimumas ir funkcionalumas buvo padidintas iki tokio lygio, kurio neįmanoma pasiekti naudojant senąją analoginę technologiją. Ši technologija ne tik žymiai padidina MTBF, bet ir DSP gebėjimus tiksliai apdoroti signalus labai dideliu greičiu, bei leidžia valdyti visas UPS posistemes žymiai didesniu tikslumu.

Išankstinis užsakymas

Pasiteirauti dėl prekės

Please enable JavaScript in your browser to complete this form.

Aukščiausios kokybės medžiagos

Pagrindinės funkcijos:

DSP valdoma modulinė struktūra

Žemas įvesties srovės bendras harmoninis iškraipymas (THDi)

Aukštas įėjimo galios koeficientas

Didelis efektyvumas iki 95%

Pasirenkama įėjimo/išėjimo įtampa/dažnių diapazonas

Ekologinio režimo veikimas (pasirinktinai)

Padalytas apėjimo įėjimas (dvigubas įėjimas)

Pasirenkamas 0,8 ir 1,0 išėjimo galios koeficientas (PF)

Šalto paleidimo funkcija

Atitinka CE, TSE ir GOST standartus

3 lygių akumuliatoriaus apsauga

2 metų garantija

Techninė specifikacija: DSPowerH(10-100kVA)-EN.pdf

 

MODEL DS330HB
Power (kVA) 30
INPUT
Voltage 380/400 VAC 3P + N + G ± 20% (at 100% load) / – 40% (at 70% load)
Frequency 50Hz / 60Hz, ± 10%
Power factor ≥ 0.99 (at 100% load)
THDI (*) ≤ 3%
By-pass voltage 380/400 VAC 3 Phase + N, ± 10%
Voltage distortion ≤ 10%
Protection Fuses, Voltage & Frequency tolerance, Input power limit, Phase sequency indicator
OUTPUT
Power (kW) 30
Power factor (**) 1.0 (0.8 & 0..9 Optional)
Voltage 380/400 VAC 3F + N, ± %1
Frequency 50Hz / 60Hz
Frequency tolerance Line synchronized: ± 2% (adjustable) / Free running: ± 0.1%
Efficiency up to 95%
Crest factor 3:1
Overload protection (***) 100% – 125% load: 10 min, 125% – 150% load: 1 min, – > 150% load: by pass
Other protections Advanced short circuit, Voltage tolerance, DC balance, Regenerative load, Current limiting
Voltage THD ≤ 2% (linear load), ≤ 5% (non-linear load)
BATTERIES
Type VRLA AGM / GEL / NiCd
Number of batteries 2×30 (±30): 60 pieces
Charge voltage 2×405 VDC
End of discharge voltage 2×300 VDC
Battery cabinet Internal External
Battery ambient temperature 25ºC
Protections 3 level alarms, Battery fuses, Charging current limit, Temperature compensation (optional)
Automatic testing Standard every 72 hours (adjustable)
GENERAL
Standards EN62040-1, EN62040-2, EN62040-3
User interface 4 lines LCD panel, Mimic leds, 5 vector buttons, Buzzer
Indicators P-N voltage, P-P voltage, Current, Power, Crest Factor, Frequency, PF, Service Time
Advanced Self diagnostics, 3 maintenance time indicators, Calibration over RS232,operating hour meter
Communication 2xRS232 serial ports, 4 standard and 8 optional DRY contact alarm relays
Inputs EPO input, Interactive battery panel input, Genset input
Genset kit Standard (programmable)
Software Standard T-Mon UPS Management Software (3 clients + 1 server management)
Alarm logging Standard:with time & date 512 events
Protections Power module over-temperature, Overcurrent, Temperature high alarm
Temperature range 0ºC – 40ºC
Protection degree IP20
Relative humidity 90% max. (non-condensing)
Altitude < 1000m above sea level
Acoustic noise < 57dBA
Weight (kg) 100
Dimensions (mm) HxWxD 1040x400x815
OPTIONS
Different input / output voltage Please ask
Transformer Galvanic isolation transformer at the input & output (internal)
Software T-Mon Admin Multi UPS monitoring 10-50-100-200 clients, T-Mon Server 50-100-200 clients
Adaptors SNMP, RS485, Remote monitoring panel, MODBUS (RS485 or TCP/IP), TCP/IP, GSM/GPRS Modem, Comport multiplexer
Parallel operation Up to 8 units
(*) Depending on power and input/output conditions.
(**) Please ask for PF 0.8 and 0.9
(***) The waiting times for excessive loads vary depending on the ambient temperature.

 

Panašūs produktai